Linear Drives:
High Dynamics and Precision.
Linear drives are utilised wherever high demand are placed on speed , acceleration and contour accuracy. Permanent magnets are located along the axis and a slide unit moves above them. The constant air gap between the permanent magnets and thye slide unit ensures that the dynamics experience next to no friction. The power achieved from the magnetic flow via a charge in the coil current enables high dynamics and powerful drive force that can be used in this type of drive.
The X and Y axes on the Trumatic HSL 2502 C are driven in a linear fashion. In the Y direction, two linear drives are coupled together electrically - not mechanically. The precise control of the axis is taken over by a direct - operation measurement and adjustment system. This provides the linear drives with their very high degree of accuracy.
Two Cutting Heads:
Parallel - for Double the Productivity
The two cuttings heads are arranged on the X axis and can be positioned as desired. The distance between the two cutting heads is adjusted via programme control. Each cutting head is supplied by its own TLF laser ensuring consistent cut quality across the entire working area.
The capacitive height regulation DIAS III separately regulates the cutting distance from the metal for each cutting head. Optimal cutting results, even with uneven sheets, are a matter of course.
DIAS III detects the center of the sheets. Manual repositioning is therefore no longer necessary and this also avoids scratching.
The cutting heads can of course be operated individually as well. Machining takes place either with the two cutting heads parallel to each other or with one cutting head on its own